Welcome to P. Parmar Machine Tools

Home  |  Inquiry Form  |  Contacts  |  Site Maps

 
Tapping machine,Tapping machine manufacturer,Tapping machine exporter,Tapping machine supplier,Tapping machines
             
Home Company Profile Pillar Drill Radial Drill Quality Tapping Machine  
             
Tapping machine,Tapping machine manufacturer,Tapping machine exporter,Tapping machine supplier,Tapping machines
 
Pillar Drill Machines
  Pillar Drill PS-20
  Pillar Drill PS-25
  Pillar Drill PRL-25
  Pillar Drill PRL & PSL 40
  Pillar Drill PSL 40X & PSL 40A*
   
  Radial Drill Machines
  Radial Drill R-25
  Radial Drill R-40 & R-40A
   
  Tapping Machines
  Tapping Machine TM - 6
  Tapping Machine TM - 12
  TM - 12 mm (With Rack Pinion)
 
 

Tapping Machine TM - 6


Tapping machine,Tapping machine manufacturer,Tapping machine exporter,Tapping machine supplier,Tapping machines

Specification of Tapping Machine TM-6 model
Download PDF Catalogue
 
   Specification    Model No. TM - 6

   Tapping Machine Capacity

   6 mm.

   Drilling Capacity

   3 mm.

   Spindle Travel/Table travel (6 mm.)

   60 mm.

   Distance Spindle to Column

   80 mm.

   Distance between chuck to base

   190 mm.

   Distance between chuck to work table

   movable

   Size of base Plate-L x B

   370 x 250 mm.

   Size of Work Table-L x B

   150 x 150 mm.

   Diameter of Column

   47 mm.

   V-Belt (Inside)

   -

   V-Belt for Motor (Outside)

   A-36

   No. of Spindle Speeds

   3

   Forwards Speeds Range

   480/750/1400

   Reverse Speeds Range

   480/750/1401

   Motor Single phase or three phase

   0.25 H.P.

 

   1440 R.P.M.

   Overall Height

   650 mm.

   Overall Width

   270 mm.

   Overall front to back

   540 mm.

   Weight approx

   50 Kg.

Features

  6 MM Tapping
  Machine’s Clutch
  Cone

  Specially heat lather cone also Provide specially treatment silicon liner
  cone.

  Head

  made from close grained cast iron accurately bored, rimering and
  honed in perfect paralyze between the column and spindle. Easy
  clamping device fitted for locking it on the column.

  Spindle

  Made from EN8 to withstand distortion it is lanced and mounted on
  roller bearings.

  Table

  proportionately designed for rigidity and sufficient surface area is
  provided to hole down job. It can be vertically powered or can be
  vertically powered or raised by worm and rack raised by worm rack
  (19mm). The slotting are provided to hold the heavy job.

  Base

  This is of design and provides sufficient area for heavy jobs. Slots
  are provided for convenient holding.

  Back to Tapping Machine 
 

 
  All Rights Reserved by P. Parmar Machine Tools
Design & Developed by M WEB-TECH.
Home | Company Profile | Pillar Drill | Radial Drill | Tapping Machine | Quality | Contact Us